Ford Fiesta ST Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
63 Posts
Discussion Starter · #1 ·
So I bought a 2j racing downpipe and I've heard people say about taking it out through the top? Just want to hear everyone's opinions on which way you guys have done it!! I feel like it couldn't be harder todo from below. Thanks nate
 

· Registered
Joined
·
2,234 Posts
So I bought a 2j racing downpipe and I've heard people say about taking it out through the top? Just want to hear everyone's opinions on which way you guys have done it!! I feel like it couldn't be harder todo from below. Thanks nate
Take it out the top here is a DIY LINKY



 
  • Like
Reactions: airjor13

· Registered
Joined
·
52 Posts
I removed it from the bottom. Only thing I removed from the top was air intake pipe to turbo so I could get my arms behind the motor and remove top 02 and shield bolts, then I spun the shield towards drivers side to remove the 3 downpipe to turbo bolts. After that I pulled it through the bottom leaving shield up top until the downpipe was removed. Toughest part besides removing top 02 was twisting downpipe past shield attached to the firewall.
 

· Registered
Joined
·
1,150 Posts
Took mine out from the bottom as well, that damn mounting bracket on there made it quite difficult to maneuver it out though



 

· Registered
Joined
·
488 Posts
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top