Ford Fiesta ST Forum banner
1 - 13 of 13 Posts

· Premium Member
1,025 Posts
Discussion Starter · #1 ·

We are very excited to bring you guys these products for your Ford Fiesta ST's! We only have a handful of products at this time, but we are looking to expand our offerings as more products come out.

For more information on any of the products below, just click the respective image!

We have the mountune Quick Shift plate which reduces your throws on your shifter 30%:

We also have a factory replacement Motorcraft oil filter, these are the same oil filters they use when they change your oil at the dealership!

If you are looking for something other than the factory replacement filter, we off a K&N replacement filter as well!

We look forward to carrying many new products for the Fiesta ST platform and are excited to be apart of this community!


· Premium Member
1,025 Posts
Discussion Starter · #3 ·
We also carry a few shift knobs as well! These would look great in your car!!

Click the respective image below for more information!

Black/Black COBB Tuning knob

Black/Red COBB Tuning knob

Black/Red Tanner Faust knob

JBR Cylindrical Shift Knob Blue w/ Silver

JBR Cylindrical Shift Knob Red w/ Silver

JBR Cylindrical Shift Knob Black w/ Red


· Registered
2,234 Posts
Bump for a deal :)

  • Like
Reactions: RallySport Direct

· Premium Member
1,025 Posts
Discussion Starter · #8 ·

The COBB Tuning V3 Accessports for the 2014 Ford Fiesta are here! get yours now! We have them in stock and ready to ship! They ship fast! These also qualify for free shipping, PLUS our RallySport Direct 30 day money back guarantee!

Simple ECU flashing with gauge package! The new incabin mountable Accessport V3 has a large, full color, higher resolution screen which allows you to monitor up to six parameters in real time. Fully customizable from the look (multiple bezel colors), layout (set up race, street, or dyno gauge clusters), and mounting options (choose from 1,000s of standard vehicle mounts). And what's looks without brains? More processing power, memory, and storage to flash faster while saving all of your maps and logs. This is your new Accessport.

The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!

However, the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to monitor your Fuel Economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for aftermarket gauges.

Giving you full control over the installation without removing your ECU ....the AccessPORT is truly more than just a programmer, it is the ultimate all-in-one solution for the Focus ST enthusiast!

Stage 1 Kit Includes:
- AccessPORT
- Quick Start User Guide
- USB Cable
- OBDII Connector
- Soft Case
- Blue and Silver Bezels
- Mount

Power Gains:
Stage 1 91*
Peak +3% HP / +12% TQ
Max. +5% HP / +15% TQ
Stage1 93
Peak +4% HP / +14% TQ
Max. +6% HP / +17% TQ

Results may vary. Power as tested on 2014 Fiesta ST vehicles using these identical calibrations.
Generally speaking, 91 octane calibrations have a richer fuel curve, and a less aggressive ignition advance map to help compensate for lower octane fuel blends such as those found in Arizona, California, and Nevada; and/or less than ideal atmospheric conditions. The maps designed for 93 octane are the most aggressive.

*91 and 93 octane results are compared against a 93 octane fuel baseline. Your 91 octane results may be higher than listed above; as a baseline of 91 octane fuel may read lower than our 93 octane baseline.

For more information, click any of the images below, or click HERE!


· Premium Member
1,025 Posts
Discussion Starter · #10 ·
View attachment 66

mountune Induction Upgrade Ford Fiesta ST 2014
The mountune Fiesta ST Induction Upgrade includes a uniquely constructed aluminum air box with a secondary cold air feed point. Additionally, the air box has been engineered with features that reduce the delta pressure drop by 2kPa that when coupled with the included K&N air filter, provide a 21% increase in airflow. The mountune Fiesta ST Induction Upgrade provides the foundation for further performance upgrades with an engineered approach that retains the OE appearance and reliability while providing a rich, deep induction note that reflects performance.

• Powder coated aluminum air box base
• K&N high flow air filter
• Additional cold air feed
• Easy installation
• Retains original air box cover
• Compatible with Ford "FGEK" ECU (USA Only)


1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.