Ford Fiesta ST Forum banner

TPMS error

13K views 13 replies 4 participants last post by  K_C 
Clear it with your obd2 reader if it comes back take it in.. As long as your wheels and tires are in good operating condition that is .,



 
Ok. I've went to Bink's ford and the way to reset this is very different to the American way to "train the wheels" in actual fact, you have to set the tyre pressure at this psi so if there is a fall of pressure from any of the tyres, then the error comes up. Any way's, from the ford sync you press "menu" then go to "vehicle settings" and the option under ESC (can't remember the exact name lol) then hold OK to set the new tyre pressure.

Then press power button off and on again and the error should have cleared. Useful if you want to rotate your tyres yourself and reset the error.

But it still doesn't tell us when the retrain the wheels when we get a new set of rims with a new set of tpms sensors on them. =\
Oh no MFT ??



 
wot dat? lol

@drifter - afaik, the aussie delivered ones are same as uk as well. all came from germany
Take it you are not blessed with the My Ford Touch system then



 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top