Ford Fiesta ST Forum banner

Rear license plate mount is a piece of crap

11K views 19 replies 12 participants last post by  Barry WA  
#1 ·
Anyone have any ideas on how to mount a plate so it doesn't flap
around in the wind and shake when you close the hatch? It also sticks out.

Image
 
#2 ·


Does your hatch have the lil rubber lower thingy's to help hold your plate away then one of these work great ..
 
#3 ·
Just go to Home Depot and grab some rubber stoppers for plumbing and stick them to the back of the plate, done and done!
 
#5 ·
I used all weather foam tape from Home Depot on the back of mine, mostly to stop the rattling from my sub, but it would work equally well for your problem too.
 
#20 ·
Simple: First clip the little rubber nibs that support the bottom of the plate.....leaving the larger rubber bumpers in place. The plate won't stick out so far. Then get a good, solid metal license plate frame. Tighten it down, and that should solve your problem!